About Transponder Maker Pro
Transponder Maker Pro (TMPro) is transponder programming tool and PIN calculator in one. Hardware is asmall unit, which connects to a USB port. It is simply to use and offer wide range of supported immomiliser units. TMPro is designed to help in sutiations where either diagnostic tools or vehicle dealerships cannot help..
TMPro has been produced as modular software. This means that every supported immobiliser unit is sold as separate modules. At beginning you can purchase hardware and only one module. In future you can add new modules by simple module purchasing system.
TMPro works mainly with immobilisers eeprom dumps. In order to use it you have to remove immobiliser unit from car, open it and to read specific memory device, which contain needed information. the software shows a picture of the immobiliser which is needed to be removed from the car and the memory device read. An information box is shown type of memory device and what is correct length of readed file. Depending of immobiliser unit it may be serial eeprom, Motorola MCU or Texas Instruments MCU. You can use any proper programmer to read data from it. TMPro works only with BIN or EEP files. It automatically recognises what immobiliser the file is from and automaticly goes the the reletive module. Opening an eeprom file which uses a serial eeprom type 93cXX software automatically recognises if dump is read correctly (x8bit or x16bit), and if needed, swaps the bytes. If file is incorrect in size or contains incorrect data or an incorrect file type the software will notify you of this. You must then double check your programmer and read the device again untill it is correct.
Please note that we only offer support for eeprom reading and writing with the tmpro adapter. reading and writing of eeproms with various programmers is a very skilled process and if done wrong it can stop the car from running.
If you have no experience reading eeproms or microprocessers. do not buy this product
TMPro2 Hardware costs £170